Auto Water Pump Bearing

As the car's core, the engine is perfecting with high competition, then the automatic water pump bearing, we need higher requirements, for example more loads and higher and are better sealed.

The XCGD water pump automatic bearing is that new connection style for these requirements. In fact, it is a simple type of double load bearing. The Double-load bearing does not have an internal ring, the roller track is on the shaft directly. The two charging bearings form a whole, both sides of the outer ring sealed with seal. The same load status, the radial load size is lower than other bearings. And the same conditions as the axial load, the load capacity is high compared to other bearings. Due to high precision, high precision rotation, simple structure and easy disassembly, many countries, such as America, Japan and German, use this type of structure. XCGD has all types of automatic water pump bearings and are used in cars that are performed in our China.

Feature

The automatic water pump is formed by an outer ring, automatic water pump bearing, front, rotating, fan and roller seal. The automatic water pump bearing is the most important part of the automatic water pump.  Since the high speed of revolution, it usually ranges 9000R / min, needs the high load capacity of the automatic water pump bearing. And only this can guarantee the useful life of the high-speed revolution. Due to the incomplete space, the bad operating conditions, the automatic water pump bearing must guarantee the obligation to normal revolution, and at the same time can decrease the load capacity of the bearing. It is difficult for the bearing gasket, because the reliability and ability to use the bearing will affect the use of the bearing. In total, the load capacity, the operating gasket and operational authorization are the important factors that influence the bearing capacity.

http://www.xcgdbearing.com/